DR5 / DR5.1 / R1T1 / 1.0 / 1.1

Compact 308 - - - Compact 616 - - - Modular 824 - - - MICS


Changing the ringing of a Line on your phone

IMPORTANT: PRIOR TO CHANGING A LINE SETTING ON YOUR PHONE, YOU MUST KNOW WHAT THE SYSTEM LINE NUMBER IS. PLEASE ASK YOUR INSTALLER THE SYSTEM LINE NUMBER PRIOR TO PROCEEDING

To enter a programming session, follow the next few simple steps:

1) Press FEATURE * * 2 6 6 3 4 4

2) Enter Password: 2 6 6 3 4 4

Display will read: " A. Configuration"

Using the navigation keys, as displayed below, follow the next simple steps:

3) Press: SHOW

Display will read: "1. Trk/Line Data"

4) Press: NEXT

Display will read: "2. Line Access"

5) Press: SHOW

Display will read: "Show set: ___"

6) Enter the Extension number you wish to make changes to.

Display will read: "Line assignment"

7) Press: NEXT

Display will read: "Answer DNs"

8) Press: NEXT

Display will read: "Ringing"

9) Press: SHOW

Display will read: "Line01: Ring"

10) Press: NEXT until you see the line number of which you would like to change the ring setting 

11) Press the CHANGE softkey until the line is set to either RING or No Ring, whichever you prefer.

12) Press: NEXT 

13) Press the RLS key.

Congratulations! You have successfully changed the ring setting of a Line on your phone!

 

 
All RIGHTS RESERVED. © 2004-2012 PRO TELEPHONE TECHNOLOGIES